| Peer-Reviewed

Measure and Evaluate Delay Time for Wakeup on Lan (Wol) Method of OpenFlow Switch

Received: 18 May 2016     Accepted: 1 June 2016     Published: 17 June 2016
Views:       Downloads:
Abstract

Currently, there are many ways to save energy for the switch such as change the operating modes to low power modes: SLEEP PORT and SLEEP SWITCH when there is no traffic flowing through the Ethernet ports. The switch will be waked up to normal modes when traffic flows pass through it. However, the changes of the modes of the OpenFlow Switch will create DELAY-TIME. If we know DELAY-TIME, then we will make routing algorithms and get appropriately mechanisms to ensure no impact on the transmission of data and loss packets. In this paper, we propose a remedy to measure and evaluate DELAY-TIME when we use the Wakeup On Lan (WOL) method for OpenFlow switch based on NetFPGA platform.

Published in Journal of Electrical and Electronic Engineering (Volume 4, Issue 3)
DOI 10.11648/j.jeee.20160403.15
Page(s) 68-72
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2016. Published by Science Publishing Group

Keywords

OpenFlow Switch, NetFPGA, Wakeup On Lan, Delay Time, Data Center Network, Green Networking

References
[1] Growth in data center electricity use 2005 to 2010, http://www.analyticspress.com/datacenters.html
[2] M. Gupta, “A feasibility study for power management in lan switches,” in Proceedings of the 12th IEEE International Conference on Network Protocols, 2004.
[3] Eugene Shih, Paramvir Bahl, Michael J. Sinclair, “Wake on wireless: An Event Driven Energy Saving Strategy for Battery Operated Devices.”
[4] “IEEE 802. 1 X Wake in LAN Support” Authentication Services Configuration Guide Cisco IOS Release 15 MT.
[5] “Magic Packet Technology” White paper, combinations thereof are trademarks of Advanced Micro Devices.
[6] M. Gupta and S. Singh, “Dynamic ethernet link shutdown for energy conservation on ethernet links,” in IEEE International Conference on Communications, 2007.
[7] C. Gunaratne, K. Christensen, B. Nordman, and S. Suen, “Reducing the energy consumption of ethernet with adaptive link rate (alr),” IEEE Transactions on Computers, vol. 57, pp. 448–461, 2008.
[8] S. Nedevschi, L. Popa, G. Iannaccone, S. Ratnasamy, and D. Wetherall, “Reducing network energy consumption via sleeping and rate-adaptation,” in Proc. of NSDI, Berkeley, CA, USA: USENIX Association, pp. 323–336, 2008.
[9] T. H. Vu, V. C. Luc, N. T. Quan, T. Thanh, N. H. Thanh, P. N. Nam “Design Sleep mode and Wakeup method for OpenFlow Switches” in Journal of Low Power Electronics, Vol. Number 3, pp. 347-353, September 2014.
[10] T. H. Vu, T. Thanh, V. Q. Trong, N. H. Thanh, P. N. Nam “Energy Saving for OpenFlow Switch on the NetFPGA platform Using Multi-Frequency” in International Journal of Computing and Network Technology, No. 1, pp. 9-15, 1 Jan 2014.
[11] Dongwook Kim “Gigabit Media Independent Interface – Gigabit Ethernet Nework” Feb, 28 2014.
[12] Glen Gibb, John W. Lockwood, Jad Naous, Paul Hartke, and Nick McKeown “NetFPGA – An Open Platform for Teaching How to Build Gigabit-rate Network Switches and Routers” IEEE Transactions on Education, 2008.
[13] http://netfpga.org/10G_specs.html
Cite This Article
  • APA Style

    Tran Hoang Vu. (2016). Measure and Evaluate Delay Time for Wakeup on Lan (Wol) Method of OpenFlow Switch. Journal of Electrical and Electronic Engineering, 4(3), 68-72. https://doi.org/10.11648/j.jeee.20160403.15

    Copy | Download

    ACS Style

    Tran Hoang Vu. Measure and Evaluate Delay Time for Wakeup on Lan (Wol) Method of OpenFlow Switch. J. Electr. Electron. Eng. 2016, 4(3), 68-72. doi: 10.11648/j.jeee.20160403.15

    Copy | Download

    AMA Style

    Tran Hoang Vu. Measure and Evaluate Delay Time for Wakeup on Lan (Wol) Method of OpenFlow Switch. J Electr Electron Eng. 2016;4(3):68-72. doi: 10.11648/j.jeee.20160403.15

    Copy | Download

  • @article{10.11648/j.jeee.20160403.15,
      author = {Tran Hoang Vu},
      title = {Measure and Evaluate Delay Time for Wakeup on Lan (Wol) Method of OpenFlow Switch},
      journal = {Journal of Electrical and Electronic Engineering},
      volume = {4},
      number = {3},
      pages = {68-72},
      doi = {10.11648/j.jeee.20160403.15},
      url = {https://doi.org/10.11648/j.jeee.20160403.15},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.jeee.20160403.15},
      abstract = {Currently, there are many ways to save energy for the switch such as change the operating modes to low power modes: SLEEP PORT and SLEEP SWITCH when there is no traffic flowing through the Ethernet ports. The switch will be waked up to normal modes when traffic flows pass through it. However, the changes of the modes of the OpenFlow Switch will create DELAY-TIME. If we know DELAY-TIME, then we will make routing algorithms and get appropriately mechanisms to ensure no impact on the transmission of data and loss packets. In this paper, we propose a remedy to measure and evaluate DELAY-TIME when we use the Wakeup On Lan (WOL) method for OpenFlow switch based on NetFPGA platform.},
     year = {2016}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Measure and Evaluate Delay Time for Wakeup on Lan (Wol) Method of OpenFlow Switch
    AU  - Tran Hoang Vu
    Y1  - 2016/06/17
    PY  - 2016
    N1  - https://doi.org/10.11648/j.jeee.20160403.15
    DO  - 10.11648/j.jeee.20160403.15
    T2  - Journal of Electrical and Electronic Engineering
    JF  - Journal of Electrical and Electronic Engineering
    JO  - Journal of Electrical and Electronic Engineering
    SP  - 68
    EP  - 72
    PB  - Science Publishing Group
    SN  - 2329-1605
    UR  - https://doi.org/10.11648/j.jeee.20160403.15
    AB  - Currently, there are many ways to save energy for the switch such as change the operating modes to low power modes: SLEEP PORT and SLEEP SWITCH when there is no traffic flowing through the Ethernet ports. The switch will be waked up to normal modes when traffic flows pass through it. However, the changes of the modes of the OpenFlow Switch will create DELAY-TIME. If we know DELAY-TIME, then we will make routing algorithms and get appropriately mechanisms to ensure no impact on the transmission of data and loss packets. In this paper, we propose a remedy to measure and evaluate DELAY-TIME when we use the Wakeup On Lan (WOL) method for OpenFlow switch based on NetFPGA platform.
    VL  - 4
    IS  - 3
    ER  - 

    Copy | Download

Author Information
  • Danang College of Technology, The University of Danang, Danang, Vietnam

  • Sections